공장 서핑 보드 나무 PVC 드롭 스티치 풍선 Isup 패들 보드 스탠드 패들 보드

기본정보

모델 번호.	AY-CB-01
크기	맞춤형
품질	우수한
배달	10 일
보증	3 년
그림 물감	맞춤형
운송 패키지	판지 상자
사양	8′ 9′ 9′6" 10′ 10′6, 11′ 11′6" 1/Customzied
등록 상표	OEM
기원	중국
HS 코드	9506290000
생산 능력	500000

제품 설명

상품명	공장 서핑 보드 나무 PVC 드롭 스티치 풍선 ISUP 패들 보드 스탠드 패들 보드
재료	드롭 스티치, PVC, EVA
품질	적층 이중층 (퓨전), 단일층, 단일 직조, 이중 직조
크기	8' 9' 9'6" 10' 10'6" 11' 11'6" 12'6" 14' / Customzie
디자인/색상	맞춤형 디자인, 맞춤형 색상, 나뭇결 스타일
상표	맞춤형 브랜드 및 로고
공기압	15-25PSI
지느러미	표준 1개의 메인 핀 또는 1+2개의 핀, 작은 핀의 경우 분리 가능 또는 고정 가능
기타 사용자 정의	스탠드 그립 패드, 번지 스트랩, D링, 핸들, 액션 카메라 마운트, 윈드서핑 홀더
부속품	패들, 고압(HP) 핸드펌프, 안전끈, 백팩, 수리 키트
포장

FAQ1.What kind of guarantee you can be given?We guarantee all the product will be good at least 3 year;defective products will be changed by a free replacement after confirmed because of Quality problem.2.What kind of wear and tear should I watch for?Besides a small leak or tear you should check around all the valves and seams once in a while to make sure they are secure and not leaking any air.You can do this by using soap and water mixture in a spray bottle.Other wear and tear to be aware of is any breaking down of the material or stains that should eventually be removed with acleaner.3.How should I store it?Store it in a dry place away from direct exposure to hot sunlight or cold conditions.Deflated and rolled into its carry bag, it can be stored in any small space such as in a closet or garage.The important thing to remember is to make sure it is completely dry before packing it away so you don't end up with mold and mildew to clean up later.4.How long does an flat surfboards take to inflate?With a hand pump,it will take about 4 - 8 minutes. With a good electric pump it can take 30 seconds to 1 minute.the barometric needle points to 15PSI5.What should I pay attention to when using it for the first time?After receiving the sup, please check if the product is damaged due to transportation, and make sure it is inflated before it is damaged.1. The first charge is recommended to inflate 80% and put it for 8 hours (spring, summer, autumn and winter) and put it into use.This can effectively extend the service life of the inflated product due to the need for a buffering process inside the product.2. The temperature in winter is low. Although the cold resistance index of our products reaches the market standard, PVC products will become hard and brittle at low temperatures during the delivery process. In order to prolong the service life of the products, it is recommended to be placed indoors for more than 24 hours. Re-inflate, otherwise it will easily cause rupture at the crease and cause air leakage.